Share this page

Search Results


VIEW List View Grid View Refresh Sort Order
You searched with the following criteria: Energy Savings

We found a total of 10 results for your selected tag.

Condensate Polisher Shipped to Canada
>

Recently, we shipped a sodium cycle condensate polisher to Ontario, Canada for a combined cycle power plant.  The system was constructed entirely of 304 stainless steel.   Company Combined Cycle Power plant Water Treatment Application Condensate Polisher to scavenge trace hardness and iron from returning condensate Savings and/or ROI Loss Prevention keeping heat transfer surfaces clean and


Condensate Polisher Shipped to Michigan
>

A condensate polisher for a district heating plant in Michigan was shipped last week.  Dual Skid-Mounted Condensate Polisher for District Heating Plant in Michigan   Customer: Utility District Heating Water treatment application: Condensate Polisher to scavenge trace hardness and iron Expected savings: Loss prevention keeping heat transfer surfaces clean and reliable for years of trouble


Condensate Polisher Shipped to New Jersey University
>

Last week, Res-Kem shipped a condensate polisher to a New Jersey university.  This condensate polisher will be installed as part of a new onsite power production facility at the university operated by an independent energy development company.  They will produce power for the university under a DBOM (Design, Build, Operate, Maintain) agreement. Excess power produced


Water Softener vs. Condensate Polisher – Knowing the Differences Can Help you “Get Greener”
>

Many companies are on a constant quest to run their business in the most energy-conscious, money-saving way possible. For those whose operations involve a low-pressure boiler system environment, investing in a condensate polisher is one of the easiest ways to “get greener” through energy efficiency and dollar savings. In most every boiler plant, cold water


Q&A on Condensate Polishers with Res-Kem’s Kevin Preising
>

While dirty condensate clean-up can be an energy buster in most processing plants, one cost effective solution is to polish contaminated condensate for re-use. Condensate polishers use a simple ion exchange technology that is easy to operate, easy to maintain and economical to use – less make-up water is required which leads to lower chemical


GlobalSpec Condensate Polisher Presentation Archive
>

GlobalSpec now has easier access to presentation archives from their Virtual tradeshows. Here is the presentation Kevin Preising gave at the “Industrial Processing” event in August of 2010 entitled “Reuse the energy – don’t lose it!” Why should I view the presentation?With fuel comprising 60-70% of the operating costs of a typical steam plant, dumping


Condensate Polisher ROI Presentation
>

Reuse It – Don’t Lose It! The Economics of Condensate Polishing was presented at the GlobalSpec Industrial Processing virtual tradeshow on August 25, 2010. It is a rather long presentation so we posted in two pieces on YouTube. Abstract of Presentation: In today’s environment of economic pressure and high energy costs, engineers are constantly asked


Presentation on Condensate Polisher ROI
>

As I alerted in a previous post, Kevin Preising of Res-Kem gave a webcast entitled “Reuse It or Lose It – The Economics of Condensate Polishing”. This excellent webcast was given at the GlobalSpec Industrial Processing virtual trade show on August 25 showing how a condensate polisher can pay for itself in 9.6 months! You


Economics of Condensate Polishing
>

On August 25, 2010, Res-Kem’s Kevin Preising will make a presentation entitled “Reuse It – Don’t Lose It! The Economics of Condensate Polishing” as part of the Industrial Processing on line tradeshow presented by GlobalSpec. Abstract of Presentation: In today’s environment of economic pressure and high energy costs, engineers are constantly asked to do more


Condensate Polisher Savings of 23% Realized Through Value Engineering
>

The white paper, Condensate Polisher Savings of 23% Realized Through Value Engineering, shows how a value engineering team comprised of personnel from a well-known university, Res-Kem Corp, and a mechanical contractor yielded the best system for the money. These savings substantially improved the return on investment. This was accomplished without making any compromises on the



How Can We Help?
Looking to service, replace, expand, or improve your water pretreatment system? Need supplies or replacement parts for your pretreatment water equipment? Let Nalco PTS help you find what you're looking for or contact Nalco for further assistance with all of your water pretreatment system needs.
About Pretreatment Solutions
Nalco Pretreatment Solutions (PTS) is a leading manufacturer and supplier of services, systems and supplies for industrial and commercial water pretreatment systems for treating process water, product water, boiler pretreatment, and drinking water.
Privacy Policy
© 2016 Nalco
An Ecolab Company