Condensate Polishers >>

Res-Kem’s Sodium Cycle Condensate Polishers

Res-Kem’s Condensate Polishers are high quality industrial systems. They are available in a wide range of self-contained packages configured in single, double and triple unit arrangements. Standard features are as follows:

1. All Stainless Steel Wetted Parts
2. Flow Rates up to 710 gpm for single units
3. ASME Code Stainless Steel Vessel Designed for 100 psig
4. Factory Assembled Stainless Steel Butterfly and/or Aquamatic Valve Nest
5. Stainless Steel Hub and Lateral Underdrain
6. NEMA 4XFG Electrical Enclosure
7. Outlet Water Sample Valve
8. Automatic Backwash Flow Controller
9. Separate Cold Water Connection for Regeneration Cycles
10. High capacity, High Crosslinked Macroporous Cation Resin
11. Raw Water Bypass Piping
12. Factory, pre-assembled valve nest on each tank

1. Allen Bradley PLC
2. Differential Pressure Switch
3. Flow Sensor
4. Water Sample Cooler
5. Manual Isolation Valves
6. Skid Assembly

The power industry operates in an environment of increasingly stringent boiler feed water requirements and unfortunately, condensate systems always leak. Heat exchangers are where most of the leakage problems start. This is where untreated cooling water can contaminate the process water causing corrosion. Every system must have a method to handle this leakage. When a condensate system is not properly controlled or simply ignored, corrosion takes place. Iron, copper, and other harmful contaminants are washed back into the boiler systems. This wastes energy because these contaminants reduce heat transfer.

A simple solution is to blow down the boiler to improve water quality, but this wastes heat and requires more makeup water. Couple this with exploding energy costs and one finds boiler blow down to be the least desirable way of maintaining proper boiler water quality.

The cost effective solution is to "polish" your contaminated condensate for reuse. As more condensate is reused, less make up water is required, reducing both chemical consumption and energy requirements. So, the cost effective alternative to boiler blow down one needs to look no further than simple sodium cycle condensate polishing. It’s the smart choice when looking for a means to control corrosion transport and the ill effects of condenser in-leakage. Particularly pronounced are the operating savings realized relative to chemical and energy consumption. Relying on proven ion exchange technology condensate polishers are also simple to operate and maintain.

Let Res-Kem work up the energy savings available by polishing your dirty condensate. The payback is both swift and dramatic.

Downloads and Technical Information on Industrial Condensate Polishers

Contact Res-Kem Corp. - Your Industrial Water Softeners Specialist

Click Here to Contact Res-Kem for further assistance with all your industrial water softener needs.

Res-Kem condensate Polishers are fully assembled at our factory in Aston, PA.